Anker SOLIX C1000 Gen 2 – 2000W Portable Power Station in Bangladesh

The Anker SOLIX C1000 Gen 2 is a powerful and compact portable power station designed to provide reliable backup electricity for homes, offices, outdoor activities, camping, travel, and emergency situations. With a 1,024Wh LiFePO4 battery, 2,000W continuous AC output, and 3,000W peak output, it can power a wide range of everyday appliances and electronic devices.

Key Features

• 2,000W Continuous AC Output – Power multiple appliances and electronics simultaneously.
• 3,000W Peak Output – Provides additional surge capacity for devices with higher startup power requirements.
• 1,024Wh LiFePO4 Battery – Long-lasting and safer battery technology designed for extensive daily use.
• 4,000 Charge Cycles – Anker states the battery can retain at least 80% capacity after 4,000 cycles.
• 49-Minute UltraFast Charging – With HyperFlash enabled through the Anker app, the unit can recharge from 0–100% in approximately 49 minutes at up to 1,600W AC input.
• 600W Solar Charging – Supports solar input up to 600W with an 11–60V MPPT input range. A full solar recharge can take approximately 1.8 hours under suitable conditions.
• 10ms UPS Backup – Fast automatic switchover helps keep sensitive electronics such as computers and networking equipment running during power interruptions.
• Multiple Charging Methods – Recharge through AC power, solar panels, vehicle/car input, generator and compatible alternator charging solutions.
• Smart App Control – Monitor and manage the power station through the Anker app using Wi-Fi/Bluetooth.
• Portable Design – Weighing approximately 11.3 kg, the C1000 Gen 2 is designed to be easy to move and store.
• Quiet Operation – Anker specifies approximately 20 dB operation when discharging below 200W.

Battery & Power

• Battery Type: LiFePO4
• Battery Capacity: 1,024Wh
• AC Rated Output: 2,000W
• Peak/Surge Output: 3,000W
• Battery Cycle Life: Up to 4,000 cycles
• UPS Transfer Time: <10ms

Charging

AC Charging

The C1000 Gen 2 supports up to 1,600W AC input with HyperFlash, allowing a full recharge in approximately 49 minutes when the appropriate fast-charging mode is enabled.

Solar Charging

The built-in MPPT solar charging system supports:

• Maximum Solar Input: 600W
• Solar Voltage: 11–60V
• Solar Charging: Approximately 1.8 hours under suitable conditions

This makes the C1000 Gen 2 suitable for backup power systems where solar charging is required.

Output Ports

The power station provides multiple output options for different types of devices:

• AC Output: Up to 2,000W
• Peak Output: 3,000W
• USB-A: Up to 12W
• USB-C: Up to 140W on supported ports
• 12V Car Output: 120W
• AC Outlets: Multiple AC outlets for household and office appliances

The available ports allow users to operate and charge laptops, smartphones, networking equipment, TVs, refrigerators, lights, fans, cameras, CPAP machines and many other compatible devices.

UPS Backup

With a <10ms UPS switchover, the C1000 Gen 2 can automatically switch to battery power when the mains electricity fails. This is particularly useful for:

• Desktop computers
• Laptops
• Wi-Fi routers
• CCTV systems
• Networking equipment
• Home-office equipment
• Medical equipment that supports the required electrical specifications

Ideal For

Home Backup

• Fans
• LED lights
• TV
• Refrigerator
• Wi-Fi router
• Laptop and computer
• Small appliances

Office & Business

• Computers
• Monitors
• Routers
• CCTV
• Networking equipment
• Emergency backup power

Outdoor & Travel

• Camping
• RV/car travel
• Photography
• Outdoor events
• Mobile workstations

Emergency Power

• Load-shedding backup
• Emergency lighting
• Communication equipment
• Essential household appliances

Physical Specifications

• Dimensions: 38.4 × 20.8 × 24.4 cm
• Weight: Approximately 11.3 kg
• Battery: LiFePO4
• Connectivity: Wi-Fi & Bluetooth
• Warranty: 5 years, depending on market/seller terms

Important Note

The actual backup time depends on the connected load, inverter efficiency, battery condition, ambient temperature and operating conditions. A 1,024Wh capacity does not mean 1,024Wh will necessarily be available to AC appliances, because conversion losses and the power station's operating overhead reduce usable energy.

For appliances with motors or compressors—such as refrigerators, pumps and certain power tools—the startup surge should also be considered when determining whether the C1000 Gen 2 is suitable.

Why Choose Anker SOLIX C1000 Gen 2?

The C1000 Gen 2 combines 2,000W output, 1,024Wh LiFePO4 storage, ultra-fast 49-minute AC charging, 600W solar charging and <10ms UPS switching in a compact portable package. It is designed to work as both an everyday portable power source and a reliable backup solution during power interruptions.

নোটঃ সোলার প্যানেল এই অফারের সাথে ইঙ্কলুডেড না, সোলার প্যানেল আলাদা নিতে হবে এবং এই প্রোডাক্ট এর জন্য বেষ্ট Jinko 620W Solar Panel বা Longi 750W Solar Panel এর ১ টি সোলার প্যানেল নিতে পারেন।